Back to all devices

Philips 9290042970A in Home Assistant

Buttons & remotes · Zigbee · Hue wired wall switch module

Zigbee2MQTT Custom quirk shared in an issue 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Philips
Model: 9290042970A
Device type: Buttons & remotes
Radio: Zigbee
Reports itself as: ROM002
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Philips Hue Bridge – paired with the Hue Bridge; the Hue integration brings its lights, switches and sensors into Home Assistant. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The Philips Hue Wall Switch Module (Wired) with ROM002 hardware revision does not track energy usage correctly due to a quirk issue. since August 21, 2026 · zha-device-handlers #5272

ZHA quirks for this device

Custom quirk shared in an issue Recommended quirk

Shared in the issue tracker; of the custom quirks for this device, the one most people agreed with and that adds the most.

Source: zha-device-handlers · issue #5272 · by @kijanskithomas · September 15, 2026
Signature: Philips / ROM002

1 more quirk for this device

Custom quirk shared in an issue Signify Netherlands B.V. / ROM002 zha-device-handlers · issue #5272 · by @kijanskithomas · September 15, 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Nedis ZBRC10WT Buttons & remotes · Zigbee, Wi-Fi · Security remote control Zigbee2MQTT Tuya Local (HACS) Custom quirk needed Review
Aqara WXKG11LM Buttons & remotes · Zigbee · Wireless mini switch Zigbee2MQTT ZHA quirk 3 open reports Review
Innr RC 250 Buttons & remotes · Zigbee · Remote control Zigbee2MQTT 1 open report Review
MiBoxer FUT089Z Buttons & remotes · Zigbee · RGB+CCT Remote Zigbee2MQTT Custom quirk needed 1 open report Review