Back to all devices

MiBoxer FUT089Z in Home Assistant

Buttons & remotes · Zigbee · RGB+CCT Remote

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

We have a detailed page on this device with compatibility ratings and prices. Details and compatibility

Brand: MiBoxer
Model: FUT089Z
Device type: Buttons & remotes
Radio: Zigbee
Reports itself as: _TZ3000_xwh1e22x, _TZ3000_zwszqdpy
Also sold as: Ledron YK-16
Zigbee2MQTT: Device page on zigbee2mqtt.io

Where to buy

MiBoxer

miboxer B09R44V4LZ

1 offer

Offers for miboxer B09R44V4LZ, best price first, then sorted by total price
Shop	Offer	Price	Shipping	Delivery	Go to shop
	MiBoxer FUT089Z RGB+CCT-Fernbedienung (Zigbee 3.0)	Price out of date		Nur noch 9 auf Lager	Check current price at Amazon.de

Ad * Affiliate link: if you buy through this link, we earn a commission at no extra cost to you.

As an Amazon Associate I earn from qualifying purchases.

Made with affilinode (opens in a new tab)

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The miboxer fut089z device is not integrated with ZHA, preventing its use in Home Assistant. Support would enable control and monitoring of its functions within the Home Assistant ecosystem. since October 15, 2022 · zha-device-handlers #1829

Changes proposed for ZHA

pull request A pull request proposes adding support for the Tuya TS1002 device, which is not currently recognized. This would enable Home Assistant to interact with the device. since August 2, 2026 · zha-device-handlers #5224

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #5224 · by @lazareveugene · August 2, 2026
Signature: _TZ3000_te34fjg4 / TS1002

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Nedis ZBRC10WT Buttons & remotes · Zigbee, Wi-Fi · Security remote control Zigbee2MQTT Tuya Local (HACS) Custom quirk needed Review · from 20.48 €
Aqara WXKG11LM Buttons & remotes · Zigbee · Wireless mini switch Zigbee2MQTT ZHA quirk 3 open reports Review
Philips 929003017102 Buttons & remotes · Zigbee · Hue wall switch module Zigbee2MQTT ZHA quirk 3 open reports Review
Innr RC 250 Buttons & remotes · Zigbee · Remote control Zigbee2MQTT 1 open report Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.