Philips Hue White and Color Ambiance E27

1. Go to Settings → Devices & services → Add integration and search for Philips Hue.
2. Follow the config flow – devices on the same network are usually discovered automatically.

1. Open Zigbee2MQTT → Settings → Permit join (or enable joining for a specific coordinator/router).
2. Put Philips Hue White and Color Ambiance E27 into pairing mode: Über die Hue-App oder per Touchlink mit einem Hue-Dimmschalter direkt an der Lampe zurücksetzen.
3. Watch the Zigbee2MQTT log – the device shows up with the model ID LCA001.
4. Rename the device to a friendly name; entities are exposed to MQTT/Home Assistant automatically.

Supported since Zigbee2MQTT 1.6.0.

1. In Home Assistant go to Settings → Devices & services → ZHA → Add device.
2. Put Philips Hue White and Color Ambiance E27 into pairing mode: Über die Hue-App oder per Touchlink mit einem Hue-Dimmschalter direkt an der Lampe zurücksetzen.
3. Wait for the interview to finish – the device appears as LCA001.
4. If entities are missing, a ZHA quirk may be required (available from HA ).

1. Open Phoscon → Devices → Add new device and choose the matching category.
2. Put Philips Hue White and Color Ambiance E27 into pairing mode: Über die Hue-App oder per Touchlink mit einem Hue-Dimmschalter direkt an der Lampe zurücksetzen.
3. The device is added as LCA001 and exposed through the deCONZ REST API.

1. Open the Hue app → Settings → Lights → + → Search for serial number.
2. Enter the six digit serial of Philips Hue White and Color Ambiance E27 or reset it close to the bridge: Über die Hue-App oder per Touchlink mit einem Hue-Dimmschalter direkt an der Lampe zurücksetzen.

1. Install the app of the manufacturer from the Homey App Store.
2. Add the device via Devices → + → Philips Hue.
3. Put Philips Hue White and Color Ambiance E27 into pairing mode: Über die Hue-App oder per Touchlink mit einem Hue-Dimmschalter direkt an der Lampe zurücksetzen.

1. Install the Matter Server add-on and add the Matter integration.
2. For Thread devices make sure a border router (Home Assistant Connect ZBT-1, Apple TV, Nest Hub …) is online.
3. Scan the Matter QR code / enter the 11 digit setup code of Philips Hue White and Color Ambiance E27.
4. Multi-admin: share the device from another ecosystem to get a new pairing code.

1. Open the Home app → + → Add accessory.
2. Scan the Matter/HomeKit code of Philips Hue White and Color Ambiance E27.
3. A HomePod or Apple TV is required as a hub and Thread border router.