Back to all devices

Immax 07527L in Home Assistant

Motion & presence · Zigbee · NEO Smart PIR sensor 2v1 Zigbee 3.0

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Immax
Model: 07527L
Device type: Motion & presence
Radio: Zigbee
Power: Battery
Reports itself as: _TZE200_me6wtiqs
Same device as: Tuya TS0601_pir
Also sold as: Conecto COZIGPMS
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since 2026年7月12日 · zha-device-handlers #5168

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since 2026年8月6日 · zha-device-handlers #5233

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Motion sensitivity Minimum range Maximum range Target distance Distance tracking Presence sensitivity Fading time Self test result LED indicator Detection delay +36

Source: zha-device-handlers · pull request #5233 · by @haikalfouzi · 2026年8月6日
Signature: _TZE200_f1pvdgoh / TS0601

1 more quirk for this device

Custom quirk shared in an issue _TZE200_me6wtiqs / TS0601 zha-device-handlers · issue #5168 · by @artogahr · 2026年7月12日

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →