Back to all devices

Earda ESW-2ZAA-EU in Home Assistant

Wall switches · Zigbee · Smart light switch - 2 gang

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Earda
Model: ESW-2ZAA-EU
Device type: Wall switches
Radio: Zigbee
Same device as: Tuya TS0012
Also sold as: Moes ZS-EUB_2gang, Moes ZS-US2-BK-MS, TUYATEC GDKES-02TZXD, Vrey VR-X712U-0013
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Open problems

open Reported problem #4420 since 2025年10月22日 · zha-device-handlers #4420

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since 2025年9月1日 · zha-device-handlers #4303

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #5017 · by @MahdiBM · 2026年5月19日
Signature: _TZ3000_18ejxno0 / TS0012

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →