Back to all devices

Tuya TS0001_switch_module in Home Assistant

Wall switches · Zigbee · 1 gang switch module

Zigbee2MQTT Quirk proposed, not merged yet 3 open reports

Zigbee device – see the note above on what ZHA needs for it.

We have a detailed page on this device with compatibility ratings and prices. Details and compatibility

Brand: Tuya
Model: TS0001_switch_module
Device type: Wall switches
Radio: Zigbee
Power: Mains powered
Reports itself as: _TZ3000_tqlv4ug4, _TZ3210_tqlv4ug4, _TZ3000_gjrubzje, _TZ3000_tygpxwqa, _TZ3000_4rbqgcuv, _TZ3000_veu2v775, _TZ3000_prits6g4, _TZ3000_xfxpoxe0, _TZ3210_9hbau615, _TZ3000_afgzktgb, _TZ3000_qamj2vnn, _TZ3000_n6fqajob
Also sold as: AVATTO ZBTS60-01, AVATTO ZWSM16-1, AVATTO ZWSM16-DC-1, Moes ZM-104-M, Moes ZM4LT1, Nous B6Z, OXT SWTZ21
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Open problems

open Reported problem #4722 since 2026年2月5日 · zha-device-handlers #4722
open Reported problem #3427 since 2024年10月15日 · zha-device-handlers #3427

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since 2026年5月25日 · zha-device-handlers #5030

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: External switch type

Source: zha-device-handlers · pull request #5188 · by @kugaevsky · 2026年7月21日
Signature: _TZ3000_tqlv4ug4 / TS0001

1 more quirk for this device

Quirk proposed, not merged yet _TZ3000_prits6g4 / TS0001 zha-device-handlers · pull request #5188 · by @kugaevsky · 2026年7月21日

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →