Back to all devices

Tuya ZY-M100-S_2 in Home Assistant

Motion & presence · Zigbee · Mini human breathe sensor

Zigbee2MQTT Quirk included in ZHA 2 open reports

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
Tuya
Model
ZY-M100-S_2
Device type
Motion & presence
Radio
Zigbee
Reports itself as
_TZE204_qasjif9e, _TZE200_qasjif9e, _TZE204_ztqnh5cg, _TZE204_iadro9bf, _TZE284_iadro9bf
Also sold as
iHseno TY_24G_Sensor_V2
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

  • support requested A TS0601 device is not supported. Adding support would enable ZHA to interact with it properly. since May 18, 2025 · zha-device-handlers #4072
  • support requested The ZigBee radar motion sensor is not supported, so it cannot detect movement. Support would allow Home Assistant to trigger alerts or automations based on motion detection. since March 20, 2025 · zha-device-handlers #3969

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Motion sensitivity Minimum range Maximum range Target distance Distance tracking Presence sensitivity Fading time Self test result LED indicator Detection delay +36

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: _TZE204_qasjif9e / TS0601

40 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top