Back to all devices

Tuya TS0726_2_gang_scene_switch in Home Assistant

Buttons & remotes · Zigbee · 2 gang switch with scene and backlight

Zigbee2MQTT Quirk proposed, not merged yet 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: TS0726_2_gang_scene_switch
Device type: Buttons & remotes
Radio: Zigbee
Reports itself as: _TZ3000_ezqbvrqz, _TZ3002_ymv5vytn, _TZ3002_6ahhkwyh, _TZ3002_zjuvw9zf, _TZ3002_a4kvf6zd, _TZ300A_ohjmifiz, _TZ3002_tlsvxhxc
Also sold as: BSEED EC-GL86ZPCS21, BSEED EC-SL-FK86ZPCS21, Mowe MW782Z
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

open The BSEED 2-gang switch controls both relays at once, but a fix using Tuya initialization would allow each relay to be controlled independently. since October 9, 2026 · zha-device-handlers #5425

Requests for ZHA support

support requested A Tuya TS0726 2-gang switch is not supported by ZHA, so it cannot be used with Home Assistant. since February 8, 2026 · zha-device-handlers #4738

Changes proposed for ZHA

pull request BSEED TS0726 2-gang switch does not work with ZHA; the fix would enable proper control of the switch. since October 29, 2026 · zha-device-handlers #5601
pull request A BSEED scene switch is not functional. Adding support would let users control scenes via the switch in Home Assistant. since June 25, 2026 · zha-device-handlers #5121

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Backlight mode Indicator mode Power-on behavior Switch mode

Source: zha-device-handlers · pull request #5121 · by @RF1705 · June 25, 2026
Signature: _TZ3002_zjuvw9zf / TS0726

2 more quirks for this device

Quirk proposed, not merged yet _TZ3002_zjuvw9zf / TS0726 zha-device-handlers · pull request #5601 · by @zigpy-review-bot · October 29, 2026
Quirk proposed, not merged yet _TZ3002_zjuvw9zf / TS0726 zha-device-handlers · pull request #4801 · by @rodillo69 · March 1, 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Nedis ZBRC10WT Buttons & remotes · Zigbee, Wi-Fi · Security remote control Zigbee2MQTT Tuya Local (HACS) Custom quirk needed Review
Aqara WXKG11LM Buttons & remotes · Zigbee · Wireless mini switch Zigbee2MQTT ZHA quirk 3 open reports Review
Philips 929003017102 Buttons & remotes · Zigbee · Hue wall switch module Zigbee2MQTT ZHA quirk 3 open reports Review
Innr RC 250 Buttons & remotes · Zigbee · Remote control Zigbee2MQTT 1 open report Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.