Back to all devices

Tuya TS0601_TZE284_gnpflcoq in Home Assistant

Motion & presence · Zigbee · 4-in-1 mmWave presence sensor

Zigbee2MQTT Quirk proposed, not merged yet 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: TS0601_TZE284_gnpflcoq
Device type: Motion & presence
Radio: Zigbee
Power: Battery
Reports itself as: _TZE284_gnpflcoq
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since August 28, 2026 · zha-device-handlers #5286
support requested Someone asked ZHA to support this device or one of its functions. since August 14, 2026 · zha-device-handlers #5252

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since June 1, 2026 · zha-device-handlers #5051

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Motion sensitivity Minimum range Maximum range Target distance Distance tracking Presence sensitivity Fading time Self test result LED indicator Detection delay +39

Source: zha-device-handlers · pull request #5051 · by @Roth-Development · June 1, 2026
Signature: _TZE284_gnpflcoq / TS0601

2 more quirks for this device

Custom quirk shared in an issue _TZE284_gnpflcoq / TS0601 zha-device-handlers · issue #5286 · by @julianjwong · August 28, 2026
Custom quirk shared in an issue _TZE284_gnpflcoq / TS0601 zha-device-handlers · issue #5252 · by @Boci-HA · August 14, 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →