Back to all devices

Tuya TS0601_pir_solar in Home Assistant

Motion & presence · Zigbee · Solar PIR occupancy sensor

Zigbee2MQTT Quirk proposed, not merged yet

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: TS0601_pir_solar
Device type: Motion & presence
Radio: Zigbee
Power: Battery
Reports itself as: _TZE284_tre6haif
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Changes proposed for ZHA

pull request A pull request proposes adding support for a Tuya solar-powered PIR motion sensor. This would allow Home Assistant to detect motion and use the sensor's data in automations. since October 13, 2026 · zha-device-handlers #5455

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Motion sensitivity Minimum range Maximum range Target distance Distance tracking Presence sensitivity Fading time Self test result LED indicator Detection delay +38

Source: zha-device-handlers · pull request #5455 · by @bestouff · October 13, 2026
Signature: _TZE284_tre6haif / TS0601

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

SONOFF SNZB-06P Motion & presence · Zigbee · Zigbee occupancy sensor Zigbee2MQTT ZHA quirk 3 open reports Review · from 20.45 €
HOBEIAN ZG-204ZL Motion & presence · Zigbee · Luminance motion sensor Zigbee2MQTT ZHA quirk 2 open reports Review
Aqara RTCZCGQ11LM Motion & presence · Zigbee · Presence sensor FP1 Zigbee2MQTT ZHA quirk Review
EGLO 99106 Motion & presence · Zigbee · Connect-Z motion (PIR) sensor Zigbee2MQTT Review