Back to all devices

Tuya TS0215A_remote in Home Assistant

Buttons & remotes · Zigbee · Security remote control

Zigbee2MQTT Custom quirk shared in an issue 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: TS0215A_remote
Device type: Buttons & remotes
Radio: Zigbee
Power: Battery
Reports itself as: _TZ3000_p6ju8myv, _TZ3000_0zrccfgx, _TZ3000_fsiepnrh, _TZ3000_ug1vtuzn, _TZ3000_eo3dttwe, _TZ3000_jwcixnrz, _TZ3000_u2bbagu4, _TZ3000_8utxxtzr
Also sold as: Nedis ZBRC10WT, Woox R7054
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested A Tuya remote alarm is not yet supported by ZHA. Adding support would allow ZHA to trigger alarms using this device. since April 21, 2026 · zha-device-handlers #4940
support requested The TS0215A device is not recognized by ZHA, so its temperature or humidity data cannot be used. Adding support would allow Home Assistant to display and react to its sensor readings. since October 1, 2021 · zha-device-handlers #1052

ZHA quirks for this device

Custom quirk shared in an issue Recommended quirk

Shared in the issue tracker as a custom quirk – not reviewed by the ZHA maintainers.

Source: zha-device-handlers · issue #1052 · by @Freezerz · October 9, 2026
Signature: _TZ3000_eo3dttwe / TS0215A

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Nedis ZBRC10WT Buttons & remotes · Zigbee, Wi-Fi · Security remote control Zigbee2MQTT Tuya Local (HACS) Custom quirk needed Review
Aqara WXKG11LM Buttons & remotes · Zigbee · Wireless mini switch Zigbee2MQTT ZHA quirk 3 open reports Review
Philips 929003017102 Buttons & remotes · Zigbee · Hue wall switch module Zigbee2MQTT ZHA quirk 3 open reports Review
Innr RC 250 Buttons & remotes · Zigbee · Remote control Zigbee2MQTT 1 open report Review