Back to all devices

Shelly S4SW-001P16EU in Home Assistant

Buttons & remotes · Zigbee · 1PM Gen 4

Zigbee2MQTT Quirk included in ZHA 2 open reports

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
Shelly
Model
S4SW-001P16EU
Device type
Buttons & remotes
Radio
Zigbee
Power
Mains powered
Same device as
Shelly S4SW-001P8EU
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

  • support requested A request to expose the switch input of Shelly 1PM/1PM Mini/1 Mini Gen4 devices as a binary sensor in Home Assistant when using firmware 2.0.0+ since October 7, 2026 · zha-device-handlers #5416
  • support requested The Shelly 1 (PM) Gen 4 lacks specific cluster support. Adding it would enable advanced power monitoring features in Home Assistant. since June 13, 2025 · zha-device-handlers #4125

Changes proposed for ZHA

  • pull request A proposed addition to support the Shelly Gen4 relay input as a binary sensor, allowing Home Assistant to monitor its state. since October 7, 2026 · zha-device-handlers #5417
  • pull request Zigbee device integration would require manual entity configuration. The pull request proposes automating cluster binding and reporting without needing entities. since June 29, 2026 · zha-device-handlers #5128

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: Shelly / Mini1PM

2 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top