Back to all devices

Schneider Electric NHMOTION/UNIDIM/1 in Home Assistant

Motion & presence · Zigbee · Motion sensor with dimmer

Zigbee2MQTT Custom quirk shared in an issue

Zigbee device – see the note above on what ZHA needs for it.

Brand: Schneider Electric
Model: NHMOTION/UNIDIM/1
Device type: Motion & presence
Radio: Zigbee
Power: Mains powered
Reports itself as: NHMOTION/UNIDIM/1
Also sold as: ELKO EKO06984, ELKO EKO06985, ELKO EKO06986
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

ZHA quirks for this device

Custom quirk shared in an issue Recommended quirk

Shared in the issue tracker as a custom quirk – not reviewed by the ZHA maintainers.

Adds: Min light level Max light level Control mode On time reload options Occupancy PIR Occupied to Unoccupied Delay Force Off Timeout Occupancy Sensitivity Occupancy Operation Mode Occupancy Mode +3

Source: zha-device-handlers · issue #4500 · by @nnae06 · November 20, 2025
Signature: Schneider Electric / NHMOTION/UNIDIM/1

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

SONOFF SNZB-06P Motion & presence · Zigbee · Zigbee occupancy sensor Zigbee2MQTT ZHA quirk 3 open reports Review · from 12.90 €
HOBEIAN ZG-204ZL Motion & presence · Zigbee · Luminance motion sensor Zigbee2MQTT ZHA quirk 2 open reports Review
Aqara RTCZCGQ11LM Motion & presence · Zigbee · Presence sensor FP1 Zigbee2MQTT ZHA quirk Review
EGLO 99106 Motion & presence · Zigbee · Connect-Z motion (PIR) sensor Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Facts about this device

How the device gets into Home Assistant

ZHA quirks for this device

Alternatives