Back to all devices

RTX ZPS4 in Home Assistant

Motion & presence · Zigbee · Human presence sensor

Zigbee2MQTT Quirk included in ZHA 1 open report

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
RTX
Model
ZPS4
Device type
Motion & presence
Radio
Zigbee
Reports itself as
_TZE28C1000000_1youk3hj
Same device as
NEO NAS-PS10B2
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

  • support requested A request to support a Tuya presence sensor with a built-in switch, enabling Home Assistant users to detect motion and control the switch remotely. since January 19, 2025 · zha-device-handlers #3729

Changes proposed for ZHA

  • pull request Sone devices (SB1191, RTX ZPS4, NAS-PS10B2) and related models have incomplete support. The proposed change would add proper support and fix issues with specific data points (DP 102 and DP 12). since October 22, 2026 · zha-device-handlers #5514
  • pull request A Haozee motion sensor is not recognized by Home Assistant. Adding a quirk would enable detection of motion. since March 3, 2026 · zha-device-handlers #4808

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Motion sensitivity Minimum range Maximum range Target distance Distance tracking Presence sensitivity Fading time Self test result LED indicator Detection delay +36

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: _TZE204_1youk3hj / TS0601

22 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top