Back to all devices

ONENUO TS0210_5oy7cysk in Home Assistant

Door & window · Zigbee · Vibration sensor

Zigbee2MQTT Custom quirk shared in an issue 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: ONENUO
Model: TS0210_5oy7cysk
Device type: Door & window
Radio: Zigbee
Power: Battery
Reports itself as: '_TZ32101000000_5oy7cysk'
Same device as: Tuya TS0210
Also sold as: EKAZA EKVZ-T1016, iHseno _TZ3000_lzdjjfss, Niceboy ORBIS Vibration Sensor
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since April 7, 2026 · zha-device-handlers #4908
support requested Someone asked ZHA to support this device or one of its functions. since May 13, 2025 · zha-device-handlers #4067

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since July 21, 2026 · zha-device-handlers #5193

ZHA quirks for this device

Custom quirk shared in an issue Recommended quirk

Shared in the issue tracker as a custom quirk – not reviewed by the ZHA maintainers.

Adds: Event count Tilt X Tilt Y Tilt Z Sensitivity

Source: zha-device-handlers · issue #4908 · by @HeartHeroDE · September 16, 2026
Signature: _TZ32101000000_5oy7cysk / TS0210

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →