Back to all devices

Niceboy ORBIS Vibration Sensor in Home Assistant

Door & window · Zigbee · Vibration sensor

Zigbee2MQTT Custom quirk shared in an issue 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: Niceboy
Model: ORBIS Vibration Sensor
Device type: Door & window
Radio: Zigbee
Power: Battery
Reports itself as: _TYZB01_821siati
Same device as: Tuya TS0210
Also sold as: EKAZA EKVZ-T1016, iHseno _TZ3000_lzdjjfss, ONENUO TS0210_5oy7cysk
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The ONENUO ZG-103Z vibration sensor is not supported. Adding support would allow Home Assistant to detect vibrations and trigger alerts. since April 7, 2026 · zha-device-handlers #4908
support requested A Tuya TS0210 vibration sensor is not recognized. Adding support would allow ZHA to detect vibrations from this device. since May 13, 2025 · zha-device-handlers #4067

Changes proposed for ZHA

pull request Legacy Bus routing for Tuya devices is being removed to fix issues with update handling. This change may improve update reliability. since July 21, 2026 · zha-device-handlers #5193

ZHA quirks for this device

Custom quirk shared in an issue Recommended quirk

Shared in the issue tracker as a custom quirk – not reviewed by the ZHA maintainers.

Adds: Event count Tilt X Tilt Y Tilt Z Sensitivity

Source: zha-device-handlers · issue #4908 · by @HeartHeroDE · September 16, 2026
Signature: _TZ32101000000_5oy7cysk / TS0210

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

SONOFF SNZB-04 Door & window · Zigbee · Contact sensor Zigbee2MQTT ZHA quirk 1 open report Review · from 16.40 €
Third Reality 3RVS01031Z Door & window · Zigbee · Zigbee vibration sensor Zigbee2MQTT ZHA quirk 1 open report Review · from 19.99 €
Aqara DJT11LM Door & window · Zigbee · Vibration sensor Zigbee2MQTT ZHA quirk Review · from 19.99 €
Immax 07045L Door & window · Zigbee · Magnetic contact sensor Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.