Back to all devices

Nous A6Z in Home Assistant

Smart plugs · Zigbee · Outdoor smart socket

Zigbee2MQTT Quirk proposed, not merged yet 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: Nous
Model: A6Z
Device type: Smart plugs
Radio: Zigbee
Reports itself as: _TZ3000_266azbg3, _TZ3008_avdpejns
Same device as: Tuya TS011F_plug_1
Also sold as: AOYAN TS011F_AOYAN, Aubess TS011F_plug_1, BlitzWolf BW-SHP13, BSEED _TZ3210_5ct6e7ye, BSEED TS011F_plug_1_2, Coswall CS-AJ-DE2U-ZG-11, EIGHTREE Socket, Elivco LSPA9, Girier JR-ZPM01, GreenSun HSC-ZW-EU, Haozee HT-SP-ZB-01, LELLKI TS011F_plug, MatSee Plus PJ-MINI-ZSW01, MatSee Plus PJ-ZSW01, MODEMIX MOD037, MODEMIX MOD048, Moes Moes_plug, Moes ZK-EU, Nedis ZBPO130FWT, NEO NAS-WR01B
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

open Smart plugs are sending frequent updates to Home Assistant, which may drain battery. Reducing the polling frequency would make the devices more energy-efficient. since September 24, 2024 · zha-device-handlers #3385

Requests for ZHA support

support requested A request for support for a Tuya TS011F device. Currently, Home Assistant cannot use it, but adding support would allow automation and control through the platform. since December 20, 2025 · zha-device-handlers #4589

Changes proposed for ZHA

pull request A Tuya plug would be converted to a newer system, improving its compatibility and reliability in ZHA. since August 12, 2026 · zha-device-handlers #5247

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Child lock Power on state Backlight mode

Source: zha-device-handlers · pull request #5247 · by @sroeper · August 12, 2026
Signature: _TZ3000_okaz9tjs / TS011F

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Aqara SP-EUC01 Smart plugs · Zigbee · Smart plug EU Zigbee2MQTT ZHA quirk 1 open report Review · from 24.10 €
AduroSmart 81848 Smart plugs · Zigbee · ERIA Power Measuring Plug (EU) Zigbee2MQTT Review
Busch-Jaeger 6717-84 Smart plugs · Zigbee · Adaptor plug Zigbee2MQTT Review
Tuya TS011F_plug_1 Smart plugs · Zigbee · Smart plug (with power monitoring) Zigbee2MQTT Custom quirk needed 2 open reports Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.