Back to all devices

BSEED TS011F_plug_1_2 in Home Assistant

Smart plugs · Zigbee · Wall-mounted electrical EU/FR/UK socket with power monitoring

Zigbee2MQTT Quirk proposed, not merged yet 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: BSEED
Model: TS011F_plug_1_2
Device type: Smart plugs
Radio: Zigbee
Reports itself as: _TZ3000_4ux0ondb, _TZ3000_b28wrpvx, _TZ3210_4ux0ondb, _TZ3000_2uollq9d, _TZ3210_2uollq9d, _TZ3210_zifx0xoj, _TZ3000_ko6v90pg
Same device as: Tuya TS011F_plug_1
Also sold as: AOYAN TS011F_AOYAN, Aubess TS011F_plug_1, BlitzWolf BW-SHP13, BSEED _TZ3210_5ct6e7ye, Coswall CS-AJ-DE2U-ZG-11, EIGHTREE Socket, Elivco LSPA9, Girier JR-ZPM01, GreenSun HSC-ZW-EU, Haozee HT-SP-ZB-01, LELLKI TS011F_plug, MatSee Plus PJ-MINI-ZSW01, MatSee Plus PJ-ZSW01, MODEMIX MOD037, MODEMIX MOD048, Moes Moes_plug, Moes ZK-EU, Nedis ZBPO130FWT, NEO NAS-WR01B, NEO Coolcam PLUG-001SPB2
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

open Reported problem #3385 since September 24, 2024 · zha-device-handlers #3385

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since December 20, 2025 · zha-device-handlers #4589

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since August 12, 2026 · zha-device-handlers #5247

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Child lock Power on state Backlight mode

Source: zha-device-handlers · pull request #5247 · by @sroeper · August 12, 2026
Signature: _TZ3000_okaz9tjs / TS011F

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.