Back to all devices

Loginovo ZG-101ZL in Home Assistant

Buttons & remotes · Zigbee · Smart button

Zigbee2MQTT Quirk included in ZHA 2 open reports

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
Loginovo
Model
ZG-101ZL
Device type
Buttons & remotes
Radio
Zigbee
Power
Battery
Reports itself as
_TZ3000_ja5osu5g, _TZ3000_lrfvzq1e, _TZ3000_kaflzta4, _TZ3000_wc3gjyp3
Same device as
Moes ERS-10TZBVB-AA
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

  • open Pressing a device for 2 seconds does not generate an event in ZHA, making it impossible to trigger actions. Fixing this would enable 2-second presses to be recognized and used in automations. since November 8, 2025 · zha-device-handlers #4473

Requests for ZHA support

  • support requested A request to add support for a HOBEIAN ZG-101ZL device, so it can be recognized and used in Home Assistant. since October 20, 2025 · zha-device-handlers #4413

Changes proposed for ZHA

  • pull request The HOBEIAN ZG-101ZL button is not supported in ZHA. The proposed change would add support for this device. since August 24, 2026 · zha-device-handlers #5274
  • pull request A pull request proposes adding support for Tuya TS004F and TS0202 model variants, which would allow Home Assistant to correctly identify and interact with these devices. since June 12, 2026 · zha-device-handlers #5086
  • pull request A proposed change would add support for the HOBEIAN ZG-101ZL button variant, allowing it to be used with Home Assistant for automation purposes. since March 30, 2026 · zha-device-handlers #4880
  • pull request The HOBEIAN ZG-101ZL button is not supported in ZHA. This pull request proposes adding support to allow Home Assistant to detect and use the button as a switch. since December 8, 2025 · zha-device-handlers #4556

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: _TZ3000_kjfzuycl / TS004F

17 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top