Back to all devices

HYSYIOT HS208Z in Home Assistant

Motion & presence · Zigbee · PIR 24Ghz human presence sensor

Zigbee2MQTT No quirk 1 open report

Zigbee2MQTT has a definition for this device. ZHA has no quirk for it – many devices work in ZHA without one, but features outside the Zigbee standard may be missing.

Facts about this device

Brand
HYSYIOT
Model
HS208Z
Device type
Motion & presence
Radio
Zigbee
Power
Battery
Reports itself as
HS208Z, _TZD200_sjjp9bti
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration. A device that follows the Zigbee standard works without a quirk; how completely this model does is not confirmed. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

  • support requested The Tuya 4-in-1 Presence Sensor (PIR + mmWave) is not supported. Adding it would let Home Assistant use its motion and presence detection features. since September 17, 2026 · zha-device-handlers #5350

ZHA quirks for this device

There is no quirk for this device – neither in ZHA nor proposed or shared as a custom quirk.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top