Back to all devices

HOBEIAN ZG-204ZE in Home Assistant

Motion & presence · Zigbee · 10G mw motion detection

Zigbee2MQTT Quirk proposed, not merged yet

Zigbee device – see the note above on what ZHA needs for it.

Brand: HOBEIAN
Model: ZG-204ZE
Device type: Motion & presence
Radio: Zigbee
Power: Battery
Reports itself as: ZG-204ZE, _TZE200_cq8lu23i, _TZE200_4pm4pekt, _TZE200_y8jijhba
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since November 1, 2025 · zha-device-handlers #4457

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Motion sensitivity Minimum range Maximum range Target distance Distance tracking Presence sensitivity Fading time Self test result LED indicator Detection delay +40

Source: zha-device-handlers · pull request #4457 · by @zimme · November 1, 2025 · 3 approvals
Signature: _TZE200_y8jijhba / TS0601

5 more quirks for this device

Custom quirk shared in an issue _TZE200_y8jijhba / TS0601 zha-device-handlers · issue #4517 · by @pansono · March 24, 2026
Custom quirk shared in an issue _TZE200_y8jijhba / TS0601 zha-device-handlers · issue #4268 · by @bobvanderlinden · January 18, 2026 · 1 approval
Custom quirk shared in an issue _TZE200_y8jijhba / TS0601 zha-device-handlers · issue #4268 · by @mawarnes · January 3, 2026 · 3 approvals
Custom quirk shared in an issue _TZE200_y8jijhba / TS0601 zha-device-handlers · issue #4268 · by @Dajitos · December 11, 2025 · 4 approvals
Custom quirk shared in an issue _TZE200_y8jijhba / TS0601 zha-device-handlers · issue #4268 · by @zimme · November 1, 2025 · 1 approval

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Facts about this device

How the device gets into Home Assistant

Known problems and fixes

Changes proposed for ZHA

ZHA quirks for this device