Aqara ZNJLBL01LM in Home Assistant

Covers & blinds · Zigbee · Roller shade driver E1

Zigbee2MQTT Quirk included in ZHA 3 open reports

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

We have a detailed page on this device with compatibility ratings and prices. Details and compatibility

Brand: Aqara
Model: ZNJLBL01LM
Device type: Covers & blinds
Radio: Zigbee
Power: Battery
Reports itself as: lumi.curtain.acn002
Also sold as: Aqara RSD-M01
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
official Aqara hub – paired with an Aqara hub that works as a Matter bridge (such as the M3 or M2), which shares supported devices with Home Assistant. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

open The Aqara Roller Shade Driver E1 does not expose reverse direction or motor state in ZHA, but this change would allow users to monitor and control these features. since October 26, 2026 · zha-device-handlers #5544
open The Aqara Roller Shade Driver E1 sometimes shows the shade as open even when closed, and battery level remains unknown. Fixing this would ensure accurate state and battery tracking. since October 7, 2026 · zha-device-handlers #5413

Requests for ZHA support

support requested The Aqara curtain motor (lumi.curtain.hagl04) cannot be controlled via Home Assistant as it lacks position tracking and commands do not work. Adding the correct quirk would enable proper control of the curtain motor. since October 23, 2026 · zha-device-handlers #5518

Changes proposed for ZHA

pull request The Aqara curtain motor (lumi.curtain.hagl04) is not recognized by ZHA. The proposed change would add support to control the curtain motor through Home Assistant. since October 23, 2026 · zha-device-handlers #5519
pull request A proposed addition to support the Aqara Curtain Driver B1, enabling Home Assistant to control and monitor it. since May 24, 2026 · zha-device-handlers #5026

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Speed Charging Calibrated

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: LUMI / lumi.curtain.acn002

1 more quirk for this device

Quirk proposed, not merged yet LUMI / lumi.curtain.acn002 zha-device-handlers · pull request #5519 · by @Aulos · October 23, 2026

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Moes MS-108ZR Covers & blinds · Zigbee · Zigbee + RF curtain switch module Zigbee2MQTT 2 open reports Review
NodOn SIN-4-RS-20 Covers & blinds · Zigbee · Roller shutter relay switch Zigbee2MQTT ZHA quirk 1 open report Review
Legrand 067776 Covers & blinds · Zigbee · Netatmo wired shutter switch Zigbee2MQTT Review
LoraTap SC500ZB Covers & blinds · Zigbee · Smart curtain/shutter switch Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.