Back to all devices

Aqara RSD-M01 in Home Assistant

Covers & blinds · Zigbee · Roller shade driver E1

Zigbee2MQTT Quirk included in ZHA 3 open reports

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
Aqara
Model
RSD-M01
Device type
Covers & blinds
Radio
Zigbee
Power
Battery
Same device as
Aqara ZNJLBL01LM
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • official Aqara hub – paired with an Aqara hub that works as a Matter bridge (such as the M3 or M2), which shares supported devices with Home Assistant. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

  • open The Aqara Roller Shade Driver E1 does not expose reverse direction or motor state in ZHA, but this change would allow users to monitor and control these features. since October 26, 2026 · zha-device-handlers #5544
  • open The Aqara Roller Shade Driver E1 sometimes shows the shade as open even when closed, and battery level remains unknown. Fixing this would ensure accurate state and battery tracking. since October 7, 2026 · zha-device-handlers #5413

Requests for ZHA support

  • support requested The Aqara curtain motor (lumi.curtain.hagl04) cannot be controlled via Home Assistant as it lacks position tracking and commands do not work. Adding the correct quirk would enable proper control of the curtain motor. since October 23, 2026 · zha-device-handlers #5518

Changes proposed for ZHA

  • pull request The Aqara curtain motor (lumi.curtain.hagl04) is not recognized by ZHA. The proposed change would add support to control the curtain motor through Home Assistant. since October 23, 2026 · zha-device-handlers #5519
  • pull request A proposed addition to support the Aqara Curtain Driver B1, enabling Home Assistant to control and monitor it. since May 24, 2026 · zha-device-handlers #5026

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Speed Charging Calibrated

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: LUMI / lumi.curtain.acn002

1 more quirk for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top