OpenCCU (Proxy)
jens-maus/RaspberryMatic
0.7.0
This add-on acts as a proxy to connect Home Assistant with an externally running OpenCCU device for smart home automation.
Facts about this add-on
- Security rating
- 7 / 8
- Ingress
- yes
- Maintenance
- lively – about monthly (12 changes/year)
- Version
0.7.0- Last change
- September 6, 2026
- Repository
- jens-maus/RaspberryMatic
- Project
- github.com
- Architectures
- aarch64, amd64
How this rating comes about
Home Assistant calculates the rating itself: every add-on starts at 5, and each right it asks for or gives up moves the number. The same calculation runs here, on the configuration the add-on ships.
| Starting value of every add-on | 5 |
|---|---|
| Reached through Ingress, so no port of its own | +2 |
| Result | 7 / 8 |
A high number does not mean the add-on is good, and a low one does not mean it is dangerous – a backup add-on has to reach far into the system to do its job. The number says how much it is allowed to do, and the list above says what exactly.
Installation
- In Home Assistant open Settings → Add-ons → Add-on Store, and add the repository https://github.com/jens-maus/RaspberryMatic through the three-dot menu.
- Reload the store and open OpenCCU (Proxy).
- Install the add-on and wait for the first start.
- Switch on "Show in sidebar" – the interface then opens directly inside Home Assistant.
Add repository to my Home Assistant Open the add-on directly
Both links go through my.home-assistant.io and open the store of your own instance – no address of ours is involved.
The same software from other repositories
| Repository | Ingress | Security | Changes/year |
|---|---|---|---|
| jens-maus/RaspberryMatic – shown here | yes | 7 | 12 |
| jens-maus/RaspberryMatic | yes | 6 | 100 |
| jens-maus/RaspberryMatic | yes | 6 | 19 |
| jens-maus/RaspberryMatic | yes | 6 | 19 |
| jens-maus/RaspberryMatic | no | 1 | 3 |
Picked by: interface inside Home Assistant first, then the security rating, then how actively the add-on is maintained.