OpenCCU HAP/DRAP-Helper
jens-maus/RaspberryMatic
0.3.1
This add-on helps OpenCCU connect to HmIP-HAP and HmIPW-DRAP devices for smart home automation.
Facts about this add-on
- Security rating
- 1 / 8
- Ingress
- no
- Maintenance
- rare – once or twice a year (3 changes/year)
- Version
0.3.1- Last change
- July 29, 2026
- Repository
- jens-maus/RaspberryMatic
- Project
- github.com
- Architectures
- aarch64, amd64
How this rating comes about
Home Assistant calculates the rating itself: every add-on starts at 5, and each right it asks for or gives up moves the number. The same calculation runs here, on the configuration the add-on ships.
| Starting value of every add-on | 5 |
|---|---|
| Shares the network of the host | -1 |
| Reaches the Docker API – that alone sets the rating to 1 | – |
| Result | 1 / 8 |
A high number does not mean the add-on is good, and a low one does not mean it is dangerous – a backup add-on has to reach far into the system to do its job. The number says how much it is allowed to do, and the list above says what exactly.
What the add-on is allowed to do
- Full hardware access
- Access to the Docker API
- Uses the host network
Installation
- In Home Assistant open Settings → Add-ons → Add-on Store, and add the repository https://github.com/jens-maus/RaspberryMatic through the three-dot menu.
- Reload the store and open OpenCCU HAP/DRAP-Helper.
- Install the add-on and wait for the first start.
- Check the rights the add-on asks for before you start it – they are listed above.
Add repository to my Home Assistant Open the add-on directly
Both links go through my.home-assistant.io and open the store of your own instance – no address of ours is involved.
The same software from other repositories
| Repository | Ingress | Security | Changes/year |
|---|---|---|---|
| jens-maus/RaspberryMatic – shown here | no | 1 | 3 |
| jens-maus/RaspberryMatic – recommended | yes | 7 | 12 |
| jens-maus/RaspberryMatic | yes | 6 | 100 |
| jens-maus/RaspberryMatic | yes | 6 | 19 |
| jens-maus/RaspberryMatic | yes | 6 | 19 |
Picked by: interface inside Home Assistant first, then the security rating, then how actively the add-on is maintained.