Zurück zur Übersicht
Zigbee-Thermostat von Viessmann. Kompatibel mit Home Assistant über Zigbee2MQTT. Läuft außerdem mit ioBroker.
Kompatibel mit Home Assistant, Zigbee2MQTT und ioBroker.
- Hersteller
- Viessmann
- Modell
- ZK03840
- Modell-ID
- 7637434
Kompatibilität
WLAN
| Integration | Status | Seit | Hinweise |
|---|---|---|---|
| Home Assistant | Läuft | — | über Zigbee2MQTT |
Zigbee
| Integration | Status | Seit | Hinweise |
|---|---|---|---|
| Zigbee2MQTT | Läuft | — | — |
| ioBroker | Läuft | — | — |
Etwas falsch oder unvollständig? Erfahrung melden
Einrichtung & Anlernen
- Go to Settings → Devices & services → Add integration and search for Viessmann.
- Follow the config flow – devices on the same network are usually discovered automatically.
- Open Zigbee2MQTT → Settings → Permit join (or enable joining for a specific coordinator/router).
- Put Viessmann ZK03840 Thermostat into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- Watch the Zigbee2MQTT log – the device shows up with the model ID
7637434. - Rename the device to a friendly name; entities are exposed to MQTT/Home Assistant automatically.
- Install and open the matching adapter instance (Zigbee, Z-Wave, Matter, BLE …).
- Start the pairing mode of the adapter and put Viessmann ZK03840 Thermostat into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- The states show up under
iobroker.0.<device>.
Ähnliche Geräte
Lädt …
