Zurück zur Übersicht
Zigbee-Leuchte von Philips. Kompatibel mit Home Assistant über Zigbee2MQTT oder ZHA. Läuft außerdem mit ioBroker.
Kompatible Systeme
ZHA
Kompatibel mit Home Assistant, Zigbee2MQTT, ZHA und ioBroker.
- Hersteller
- Philips
- Modell
- 1743630P7
- Modell-ID
- 1743630P7, 1743630V7
Kompatibilität
WLAN
| Integration | Status | Seit | Hinweise |
|---|---|---|---|
| Home Assistant | Läuft | — | über ZHA und Zigbee2MQTT |
Zigbee
| Integration | Status | Seit | Hinweise |
|---|---|---|---|
| Zigbee2MQTT | Läuft | — | — |
| ZHA ZHA | Läuft | — | — |
| ioBroker | Läuft | — | — |
Etwas falsch oder unvollständig? Erfahrung melden
Einrichtung & Anlernen
- Go to Settings → Devices & services → Add integration and search for Philips.
- Follow the config flow – devices on the same network are usually discovered automatically.
- Open Zigbee2MQTT → Settings → Permit join (or enable joining for a specific coordinator/router).
- Put Philips 1743630P7 Leuchte into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- Watch the Zigbee2MQTT log – the device shows up with the model ID
1743630P7. - Rename the device to a friendly name; entities are exposed to MQTT/Home Assistant automatically.
- In Home Assistant go to Settings → Devices & services → ZHA → Add device.
- Put Philips 1743630P7 Leuchte into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- Wait for the interview to finish – the device appears as
1743630P7. - If entities are missing, a ZHA quirk may be required (available from HA ).
- Install and open the matching adapter instance (Zigbee, Z-Wave, Matter, BLE …).
- Start the pairing mode of the adapter and put Philips 1743630P7 Leuchte into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- The states show up under
iobroker.0.<device>.
Ähnliche Geräte
Lädt …
