Zurück zur Übersicht
Zigbee-LED-Lampe mit Farbsteuerung von Mercator Ikuü. Kompatibel mit Home Assistant über Zigbee2MQTT oder Tasmota.
Kompatibel mit Home Assistant, Zigbee2MQTT und Tasmota.
- Hersteller
- Mercator Ikuü
- Modell
- S9E27LED9W-RGB-Z
- Modell-ID
- TS0505B, _TZ3000_x2fqbdun
Kompatibilität
WLAN
| Integration | Status | Seit | Hinweise |
|---|---|---|---|
| Home Assistant | Läuft | — | über Zigbee2MQTT und Tasmota |
Zigbee
| Integration | Status | Seit | Hinweise |
|---|---|---|---|
| Zigbee2MQTT | Läuft | — | — |
| Tasmota | Läuft | — | — |
Etwas falsch oder unvollständig? Erfahrung melden
Einrichtung & Anlernen
- Go to Settings → Devices & services → Add integration and search for Mercator Ikuü.
- Follow the config flow – devices on the same network are usually discovered automatically.
- Open Zigbee2MQTT → Settings → Permit join (or enable joining for a specific coordinator/router).
- Put Mercator Ikuü S9E27LED9W-RGB-Z LED-Lampe mit Farbsteuerung into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- Watch the Zigbee2MQTT log – the device shows up with the model ID
TS0505B. - Rename the device to a friendly name; entities are exposed to MQTT/Home Assistant automatically.
- Flash Tasmota (see the device template) or open the console of your Zigbee bridge.
- Run
ZbPermitJoin 1and put Mercator Ikuü S9E27LED9W-RGB-Z LED-Lampe mit Farbsteuerung into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten). - Apply the device template and set the MQTT topic; entities are discovered by Home Assistant automatically.
Ähnliche Geräte
Lädt …
