Zurück zur Übersicht
Zigbee-Leuchte mit Farbsteuerung von Lidl. Kompatibel mit Home Assistant über Zigbee2MQTT, ZHA oder deCONZ. Läuft außerdem mit ioBroker.
Kompatible Systeme
ZHAdCZ
Kompatibel mit Home Assistant, Zigbee2MQTT, ZHA, deCONZ / Phoscon und ioBroker.
- Hersteller
- Lidl
- Modell
- HG06467
- Modell-ID
- TS0601, _TZE200_s8gkrkxk
Kompatibilität
WLAN
| Integration | Status | Seit | Hinweise |
|---|---|---|---|
| Home Assistant | Läuft | — | über ZHA, Zigbee2MQTT und deCONZ / Phoscon |
Zigbee
| Integration | Status | Seit | Hinweise |
|---|---|---|---|
| Zigbee2MQTT | Läuft | — | — |
| ZHA ZHA | Läuft | — | — |
| dCZ deCONZ / Phoscon | Läuft | — | — |
| ioBroker | Läuft | — | — |
Etwas falsch oder unvollständig? Erfahrung melden
Einrichtung & Anlernen
- Go to Settings → Devices & services → Add integration and search for Lidl.
- Follow the config flow – devices on the same network are usually discovered automatically.
- Open Zigbee2MQTT → Settings → Permit join (or enable joining for a specific coordinator/router).
- Put Lidl HG06467 Leuchte mit Farbsteuerung into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- Watch the Zigbee2MQTT log – the device shows up with the model ID
TS0601. - Rename the device to a friendly name; entities are exposed to MQTT/Home Assistant automatically.
- In Home Assistant go to Settings → Devices & services → ZHA → Add device.
- Put Lidl HG06467 Leuchte mit Farbsteuerung into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- Wait for the interview to finish – the device appears as
TS0601. - If entities are missing, a ZHA quirk may be required (available from HA ).
- Open Phoscon → Devices → Add new device and choose the matching category.
- Put Lidl HG06467 Leuchte mit Farbsteuerung into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- The device is added as
TS0601and exposed through the deCONZ REST API.
- Install and open the matching adapter instance (Zigbee, Z-Wave, Matter, BLE …).
- Start the pairing mode of the adapter and put Lidl HG06467 Leuchte mit Farbsteuerung into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- The states show up under
iobroker.0.<device>.
Ähnliche Geräte
Lädt …
