Zurück zur Übersicht
Zigbee-Leuchte mit Farbsteuerung von Eglo. Kompatibel mit Home Assistant über Zigbee2MQTT oder ZHA.
Kompatible Systeme
ZHA
Kompatibel mit Home Assistant, Zigbee2MQTT und ZHA.
- Hersteller
- Eglo
- Modell
- 900317
- Modell-ID
- EGLO_ZM_TW
Kompatibilität
WLAN
| Integration | Status | Seit | Hinweise |
|---|---|---|---|
| Home Assistant | Läuft | — | über ZHA und Zigbee2MQTT |
Zigbee
| Integration | Status | Seit | Hinweise |
|---|---|---|---|
| Zigbee2MQTT | Läuft | — | — |
| ZHA ZHA | Läuft | — | — |
Etwas falsch oder unvollständig? Erfahrung melden
Einrichtung & Anlernen
- Go to Settings → Devices & services → Add integration and search for Eglo.
- Follow the config flow – devices on the same network are usually discovered automatically.
- Open Zigbee2MQTT → Settings → Permit join (or enable joining for a specific coordinator/router).
- Put Eglo 900317 Leuchte mit Farbsteuerung into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- Watch the Zigbee2MQTT log – the device shows up with the model ID
EGLO_ZM_TW. - Rename the device to a friendly name; entities are exposed to MQTT/Home Assistant automatically.
- In Home Assistant go to Settings → Devices & services → ZHA → Add device.
- Put Eglo 900317 Leuchte mit Farbsteuerung into pairing mode: den Reset laut Bedienungsanleitung durchführen (meist die Taste etwa 5 Sekunden halten).
- Wait for the interview to finish – the device appears as
EGLO_ZM_TW. - If entities are missing, a ZHA quirk may be required (available from HA ).
Ähnliche Geräte
Lädt …
