Back to all devices

SONOFF SNZB-03P in Home Assistant

Motion & presence · Zigbee · Zigbee PIR sensor

Zigbee2MQTT Custom quirk shared in an issue 1 open report

Zigbee device – see the note above on what ZHA needs for it.

We have a detailed page on this device with compatibility ratings and prices. Details and compatibility

Brand: SONOFF
Model: SNZB-03P
Device type: Motion & presence
Radio: Zigbee
Reports itself as: SNZB-03P
Zigbee2MQTT: Device page on zigbee2mqtt.io

Where to buy

SONOFF SNZB-03P Zigbee Smart Bewegungsmelder,Zigbee3.0 Drahtloser...

€ 14,90

€ 16,50

Auf Lager

Buy now* Amazon.de

Sonoff ZigBee motion sensor SNZB-03P + battery

€ 12,96 +€ 4,99

N/A

Buy now* Proshop.de

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since 4 de junho de 2024 · zha-device-handlers #3188

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since 7 de janeiro de 2026 · zha-device-handlers #4628

ZHA quirks for this device

Custom quirk shared in an issue Recommended quirk

Shared in the issue tracker; of the custom quirks for this device, the one most people agreed with and that adds the most.

Adds: Presence detection timeout Last illumination state

Source: zha-device-handlers · issue #3188 · by @BillyBlaze · 12 de janeiro de 2025 · 3 approvals
Signature: eWeLink / SNZB-03P

1 more quirk for this device

Custom quirk shared in an issue eWeLink / SNZB-03P zha-device-handlers · issue #3188 · by @BillyBlaze · 19 de janeiro de 2025 · 1 approval

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.