Back to all devices

SEDEA eTH730 in Home Assistant

Climate sensors · Zigbee · Temperature and humidity sensor

Zigbee2MQTT Quirk proposed, not merged yet 3 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: SEDEA
Model: eTH730
Device type: Climate sensors
Radio: Zigbee
Power: Battery
Reports itself as: _TZ3000_lqmvrwa2
Same device as: Tuya TS0201
Also sold as: BlitzWolf BW-IS4, Danfoss 014G2480, Moes ZSS-S01-TH, Nedis ZBSC10WT, Tuya HS09, Tuya TH09Z, Tuya TS0201_1, Tuya TS0201_2, Tuya ZTH01/ZTH02, Tuya ZTH05_1, Tuya ZY-ZTH02
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Open problems

open Reported problem #4654 since 14 de janeiro de 2026 · zha-device-handlers #4654

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since 15 de dezembro de 2025 · zha-device-handlers #4575
support requested Someone asked ZHA to support this device or one of its functions. since 4 de novembro de 2025 · zha-device-handlers #4465

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since 26 de novembro de 2025 · zha-device-handlers #4527
pull request A change to ZHA for this device has been proposed and is waiting for review. since 7 de setembro de 2025 · zha-device-handlers #4319

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #4527 · by @tomuk5 · 26 de novembro de 2025 · 3 approvals
Signature: _TZ3000_isw9u95y / TS0201

2 more quirks for this device

Quirk proposed, not merged yet _TZ3000_yupc0pb7 / TS0201 zha-device-handlers · pull request #4527 · by @tomuk5 · 26 de novembro de 2025 · 3 approvals
Custom quirk shared in an issue _TZ3000_yupc0pb7 / TS0201 zha-device-handlers · issue #4575 · by @soosp · 5 de janeiro de 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.