Back to all devices

Novato ZPV-01 in Home Assistant

Water · Zigbee · Battery powered smart valve

Zigbee2MQTT Quirk proposed, not merged yet 3 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: Novato
Model: ZPV-01
Device type: Water
Radio: Zigbee
Power: Battery
Reports itself as: _TZE204_dsagrkvg, _TZE284_zm8zpwas, _TZE284_sdvbnmj5
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Open problems

open Reported problem #4672 since 20 de janeiro de 2026 · zha-device-handlers #4672

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since 28 de agosto de 2025 · zha-device-handlers #4297
support requested Someone asked ZHA to support this device or one of its functions. since 19 de maio de 2025 · zha-device-handlers #4074

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since 4 de junho de 2026 · zha-device-handlers #5058
pull request A change to ZHA for this device has been proposed and is waiting for review. since 29 de agosto de 2025 · zha-device-handlers #4300

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Weather delay Time left Timer state Last valve open duration Timer duration Frost lock Frost lock reset Irrigation cycles Irrigation mode Irrigation duration +34

Source: zha-device-handlers · pull request #5058 · by @bilgi-source · 4 de junho de 2026
Signature: _TZE204_dsagrkvg / TS0601

4 more quirks for this device

Quirk proposed, not merged yet _TZE284_zm8zpwas / TS0601 zha-device-handlers · pull request #5058 · by @bilgi-source · 4 de junho de 2026
Quirk proposed, not merged yet _TZE284_sdvbnmj5 / TS0601 zha-device-handlers · pull request #5058 · by @bilgi-source · 4 de junho de 2026
Quirk proposed, not merged yet _TZE284_zm8zpwas / TS0601 zha-device-handlers · pull request #4300 · by @tiranhay · 29 de agosto de 2025
Custom quirk shared in an issue _TZE284_zm8zpwas / TS0601 zha-device-handlers · issue #4074 · by @fokcuk · 19 de maio de 2025 · 3 approvals

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.