Back to all devices

Aqara QBKG41LM in Home Assistant

Wall switches · Zigbee · Smart wall switch E1 (with neutral, double rocker)

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

We have a detailed page on this device with compatibility ratings and prices. Details and compatibility

Brand: Aqara
Model: QBKG41LM
Device type: Wall switches
Radio: Zigbee
Power: Mains powered
Reports itself as: lumi.switch.b2nc01
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
official Aqara hub – paired with an Aqara hub that works as a Matter bridge (such as the M3 or M2), which shares supported devices with Home Assistant.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Open problems

open Reported problem #4232 since 4 de agosto de 2025 · zha-device-handlers #4232

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since 12 de junho de 2026 · zha-device-handlers #5087

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #5087 · by @FerrumLogic · 12 de junho de 2026
Signature: LUMI / lumi.switch.b2nc01

1 more quirk for this device

Quirk proposed, not merged yet LUMI / lumi.switch.b2nc01 zha-device-handlers · pull request #4982 · by @kiddyfurby · 7 de maio de 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Tuya TS0001_switch_module Wall switches · Zigbee · 1 gang switch module Zigbee2MQTT Custom quirk needed 3 open reports Review
SONOFF ZBMINIR2 Wall switches · Zigbee · Zigbee smart switch Zigbee2MQTT ZHA quirk 2 open reports Review
AduroSmart 81849 Wall switches · Zigbee · ERIA Built-in Dimmer Zigbee2MQTT Review
BTicino 3584C Wall switches · Zigbee · Connected lighting micromodule Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.