Back to all devices

Tuya SDM01V1.5 in Home Assistant

Energy · Zigbee · Smart energy monitor for 3P+N system

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: SDM01V1.5
Device type: Energy
Radio: Zigbee
Power: Mains powered
Reports itself as: _TZE204_gomuk3dc, _TZE284_gomuk3dc, _TZE200_gomuk3dc
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since 2025年3月21日 · zha-device-handlers #3971

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since 2025年11月18日 · zha-device-handlers #4502
pull request A change to ZHA for this device has been proposed and is waiting for review. since 2025年7月30日 · zha-device-handlers #4213

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Device status Total energy Energy phase A Energy phase B Energy phase C Total power Total current Energy produced Total power factor Update frequency +3

Source: zha-device-handlers · pull request #4502 · by @mcorvax · 2025年11月18日
Signature: _TZE284_gomuk3dc / TS0601

9 more quirks for this device

Quirk proposed, not merged yet _TZE204_gomuk3dc / TS0601 zha-device-handlers · pull request #4213 · by @validide · 2025年7月30日
Quirk proposed, not merged yet _TZE284_gomuk3dc / TS0601 zha-device-handlers · pull request #4213 · by @validide · 2025年7月30日
Quirk proposed, not merged yet _TZE200_gomuk3dc / TS0601 zha-device-handlers · pull request #4213 · by @validide · 2025年7月30日
Custom quirk shared in an issue _TZE204_gomuk3dc / TS0601 zha-device-handlers · issue #3971 · by @crazyracer98 · 2025年5月8日 · 1 approval
Custom quirk shared in an issue _TZE284_gomuk3dc / TS0601 zha-device-handlers · issue #3971 · by @crazyracer98 · 2025年5月8日 · 1 approval
Custom quirk shared in an issue _TZE200_gomuk3dc / TS0601 zha-device-handlers · issue #3971 · by @crazyracer98 · 2025年5月8日 · 1 approval
Custom quirk shared in an issue _TZE204_gomuk3dc / TS0601 zha-device-handlers · issue #3971 · by @validide · 2025年3月21日
Custom quirk shared in an issue _TZE284_gomuk3dc / TS0601 zha-device-handlers · issue #3971 · by @validide · 2025年3月21日
Custom quirk shared in an issue _TZE200_gomuk3dc / TS0601 zha-device-handlers · issue #3971 · by @validide · 2025年3月21日

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →