Back to all devices

Tuya 228WZH in Home Assistant

Smoke & safety · Zigbee · Smoke detector with temperature and humidity sensor

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: 228WZH
Device type: Smoke & safety
Radio: Zigbee
Power: Battery
Reports itself as: _TZE284_gyzlwu5q
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since 2025年12月30日 · zha-device-handlers #4608

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since 2025年12月30日 · zha-device-handlers #4609

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Battery low Tamper Silence alarm Self test result Motion sensitivity

Source: zha-device-handlers · pull request #4609 · by @yvan-l · 2025年12月30日 · 1 approval
Signature: _TZE284_gyzlwu5q / TS0601

2 more quirks for this device

Custom quirk shared in an issue _TZE284_gyzlwu5q / TS0601 zha-device-handlers · issue #4608 · by @dmartinlozano · 2026年3月22日
Custom quirk shared in an issue _TZE284_gyzlwu5q / TS0601 zha-device-handlers · issue #4608 · by @yvan-l · 2025年12月30日

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →