Back to all devices

Moes ZTRV-S01 in Home Assistant

Water · Zigbee · Zigbee temperature control valve

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Moes
Model: ZTRV-S01
Device type: Water
Radio: Zigbee
Power: Battery
Reports itself as: _TZE200_ivdc0kwl
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since 2026年1月29日 · zha-device-handlers #4696

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since 2026年1月30日 · zha-device-handlers #4704

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Open window detection Frost protection Local temperature calibration Child lock Valve position Battery low Away mode Schedule enable Scale protection Window open +21

Source: zha-device-handlers · pull request #4704 · by @malko · 2026年1月30日
Signature: _TZE200_ivdc0kwl / TS0601

2 more quirks for this device

Custom quirk shared in an issue _TZE200_ivdc0kwl / TS0601 zha-device-handlers · issue #4696 · by @malko · 2026年1月30日
Custom quirk shared in an issue _TZE200_ivdc0kwl / TS0601 zha-device-handlers · issue #4696 · by @malko · 2026年1月29日

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →