Back to all devices

Aqara DS-K02D/DS-K02E in Home Assistant

Covers & blinds · Zigbee · Aqara Shutter Switch H2 EU

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Aqara
Model: DS-K02D/DS-K02E
Device type: Covers & blinds
Radio: Zigbee
Power: Mains powered
Reports itself as: lumi.switch.aeu003
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
official Aqara hub – paired with an Aqara hub that works as a Matter bridge (such as the M3 or M2), which shares supported devices with Home Assistant.
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Source

Known problems and fixes

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since 2025年10月17日 · zha-device-handlers #4410

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since 2026年6月6日 · zha-device-handlers #5060
pull request A change to ZHA for this device has been proposed and is waiting for review. since 2026年2月18日 · zha-device-handlers #4769

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Force open cover Force close cover Force stop cover Multi-click button 3 Multi-click button 4 Position raw

Source: zha-device-handlers · pull request #4769 · by @totoroot · 2026年2月18日
Signature: Aqara / lumi.switch.aeu003

2 more quirks for this device

Quirk proposed, not merged yet Aqara / lumi.switch.aeu003 zha-device-handlers · pull request #5060 · by @panagiks · 2026年6月6日
Custom quirk shared in an issue Aqara / lumi.switch.aeu003 zha-device-handlers · issue #4410 · by @fkloft · 2026年1月13日

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →