Back to all devices

Zemismart ZMS1-TYZ in Home Assistant

Covers & blinds · Zigbee · Smart curtain track

Zigbee2MQTT Quirk included in ZHA 2 open reports

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

  • support requested The Curtain Motor TS0601 is not supported in ZHA. Adding a quirk would enable Home Assistant to control curtain movements via the motor. since June 3, 2026 · zha-device-handlers #5056
  • support requested A venetian blind drive from DOOYA is not properly recognized, so the blinds cannot be controlled. Adding a quirk would fix the integration, allowing Home Assistant to adjust the blinds. since August 26, 2025 · zha-device-handlers #4291

Changes proposed for ZHA

  • pull request Tuya vertical blinds have issues with smooth tilt control and communication. The proposed change would fix tilt adjustments and improve reliability when using the blinds. since October 20, 2026 · zha-device-handlers #5478
  • pull request A pull request proposes adding support for the Tuya Leisguar YS-MT750 curtain motor, which is not currently recognized by Home Assistant. This would allow users to control the motor through Home Assistant. since August 9, 2026 · zha-device-handlers #5237
  • pull request A Tuya curtain motor (v2) would not function correctly, but this change would enable proper control of its movement. since July 21, 2026 · zha-device-handlers #5189
  • pull request The Tuya curtain motor _TZE200_yrugsphv (TS0601) would be supported, enabling Home Assistant to control its motor and curtain position. since July 6, 2026 · zha-device-handlers #5153
  • pull request A Tuya curtain motor would not be controllable in Home Assistant. The pull request would add support to operate the motor via the app. since July 2, 2026 · zha-device-handlers #5140
  • pull request Tuya-based covers would gain support for MCU-based devices, allowing proper operation. They are not recognized now, so their movement cannot be controlled. since February 15, 2026 · zha-device-handlers #4757
  • pull request A Tuya curtain motor is not yet supported in Home Assistant. Adding support would allow control of the curtain motor through Home Assistant. since February 23, 2025 · zha-device-handlers #3900
  • pull request The Zemismart ZM85EL cover motor does not report battery levels in ZHA. A proposed change would allow users to monitor battery status in the Home Assistant UI, ensuring timely replacements. since May 18, 2023 · zha-device-handlers #2404

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Motor direction Set upper limit Set lower limit Delete upper limit Delete lower limit Delete all limits

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: _TZE200_cowvfni3 / TS0601

491 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top