Back to all devices

Zemismart ZM25R3 in Home Assistant

Covers & blinds · Zigbee · Tubular motor

Zigbee2MQTT Quirk included in ZHA 3 open reports

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
Zemismart
Model
ZM25R3
Device type
Covers & blinds
Radio
Zigbee
Reports itself as
_TZE200_sq6affpe
Same device as
Zemismart ZM25R1
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

  • support requested A Tuya device would be recognized as similar to another model, improving compatibility. Currently, it may not work correctly in Home Assistant. since February 19, 2026 · zha-device-handlers #4775
  • support requested The Zemismart Roller Motor ZM25R1 is not supported by ZHA, so it cannot be controlled to open or close blinds. Support would enable integration with Home Assistant for motor control. since October 13, 2025 · zha-device-handlers #4398
  • support requested A roller blind motor from Zemismart is not supported, so it cannot be controlled. Adding integration would enable Home Assistant to open and close the blinds remotely. since August 21, 2025 · zha-device-handlers #4278

Changes proposed for ZHA

  • pull request A Zemismart ZM25R3 cover motor uses incorrect data points in Home Assistant. Updating the quirk would fix its operation with proper commands. since March 1, 2026 · zha-device-handlers #4802
  • pull request A quirk is proposed to add support for a Tuya cover device. This would allow Home Assistant to control the cover once merged. since April 17, 2024 · zha-device-handlers #3114

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Motor direction Set upper limit Set lower limit Delete upper limit Delete lower limit Delete all limits

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: _TZE200_sq6affpe / TS0601

44 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top