Back to all devices

UseeLink SM-0306E-2W in Home Assistant

Smart plugs · Zigbee · 4 gang switch, with USB

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: UseeLink
Model: SM-0306E-2W
Device type: Smart plugs
Radio: Zigbee
Reports itself as: _TZ3000_cfnprab5
Same device as: Tuya TS011F_5
Also sold as: Lotus Ref 2117, UseeLink SM-O301-AZ
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested A 4-way power board is not working correctly in ZHA, leading to unreliable operation. Fixing this would ensure the board functions as intended with Home Assistant. since November 22, 2025 · zha-device-handlers #4513

Changes proposed for ZHA

pull request A proposed change to support a specific variant of a Tuya smart plug, enabling Home Assistant users to control it remotely. since January 4, 2025 · zha-device-handlers #3670
pull request A UseeLink 302EU-Zigbee power strip is not yet supported in ZHA. The proposed change would allow Home Assistant to recognize and control the power strip's outlets. since November 3, 2024 · zha-device-handlers #3481

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #3670 · by @mikeysteele · January 4, 2025
Signature: _TZ3000_cfnprab5 / TS011F

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Aqara SP-EUC01 Smart plugs · Zigbee · Smart plug EU Zigbee2MQTT ZHA quirk 1 open report Review · from 24.32 €
AduroSmart 81848 Smart plugs · Zigbee · ERIA Power Measuring Plug (EU) Zigbee2MQTT Review
Bosch BSP-FZ2 Smart plugs · Zigbee · Smart plug compact (type F plug) Zigbee2MQTT Review
Busch-Jaeger 6717-84 Smart plugs · Zigbee · Adaptor plug Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.