Back to all devices

Tuya ZTH08-E in Home Assistant

Climate sensors · Zigbee · Temperature and humidity sensor

Zigbee2MQTT Quirk included in ZHA 2 open reports

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
Tuya
Model
ZTH08-E
Device type
Climate sensors
Radio
Zigbee
Power
Battery
Reports itself as
_TZE200_cirvgep4, _TZE204_cirvgep4
Same device as
Tuya TS0601_temperature_humidity_sensor_2
Also sold as
Tuya SZTH02, Tuya ZTH01, Tuya ZTH02, Tuya ZTH05, Tuya ZTH08
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

  • open A Tuya device's battery status is not updating correctly in Home Assistant, causing inaccurate battery level reports. since August 13, 2025 · zha-device-handlers #4260

Requests for ZHA support

  • support requested A request to support a Moes smart thermostat, which currently cannot be controlled or monitored through Home Assistant. since January 3, 2025 · zha-device-handlers #3666

Changes proposed for ZHA

  • pull request If you have a ZTH05 sensor, it may not send data correctly after re-announcing. This change would make sure data is resent properly when the device re-announces. since October 30, 2026 · zha-device-handlers #5643
  • pull request The Tuya ZTH08 temperature and humidity sensor is not supported, so it cannot report data to Home Assistant. A quirk would enable these sensors to work as intended. since September 1, 2026 · zha-device-handlers #5295

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Temperature report interval Humidity report interval Display unit Temperature alarm Alarm temperature max Alarm temperature min Temperature sensitivity Humidity alarm Alarm humidity max Alarm humidity min +9

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: _TZE200_upagmta9 / TS0601

471 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top