Back to all devices

Tuya ZT08 in Home Assistant

Climate sensors · Zigbee · Weather station with clock, internal/external temperature and humidity

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Facts about this device

Brand
Tuya
Model
ZT08
Device type
Climate sensors
Radio
Zigbee
Power
Battery
Reports itself as
_TZE284_hodyryli, _TZE2841000000_hodyryli

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
  • official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

  • support requested The Tupa temperature/humidity sensor with an external probe does not report external temperature data in ZHA. Adding support would allow the external probe's readings to be used in Home Assistant. since November 14, 2025 · zha-device-handlers #4489

Changes proposed for ZHA

  • pull request A Tuya sensor does not report data correctly. Adding support would make the sensor's measurements available in Home Assistant. since June 16, 2026 · zha-device-handlers #5094
  • pull request A weather station from Tuya would not be supported in ZHA, making it impossible to use with Home Assistant. The proposed change would add support so you can view weather data in Home Assistant. since November 25, 2025 · zha-device-handlers #4520

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Temperature report interval Humidity report interval Display unit Temperature alarm Alarm temperature max Alarm temperature min Temperature sensitivity Humidity alarm Alarm humidity max Alarm humidity min +15

Source: zha-device-handlers · pull request #4941 · by @delneet · April 22, 2026
Signature: _TZE284_hodyryli / TS0601

2 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top