Back to all devices

Tuya X5H-GB-B in Home Assistant

Thermostats & TRV · Zigbee · Wall-mount thermostat

Zigbee2MQTT Quirk included in ZHA 3 open reports

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
Tuya
Model
X5H-GB-B
Device type
Thermostats & TRV
Radio
Zigbee
Reports itself as
_TZE200_2ekuz3dz
Also sold as
AVATTO ZWT-100-16A, Beok TGR85-ZB
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

  • support requested A thermostat (Moes BHT-002 GA) is not supported, so temperature control cannot be managed. Adding support would enable Home Assistant to adjust heating settings. since January 26, 2025 · zha-device-handlers #3788
  • support requested A Futurehome thermostat (Co020) is not supported in ZHA. Adding support would allow Home Assistant to control heating and cooling via the thermostat. since August 29, 2024 · zha-device-handlers #3332
  • support requested The MOES Zigbee thermostat TS0601 is not supported, so temperature settings cannot be adjusted through Home Assistant. Adding support would enable users to control heating and cooling via the thermostat. since June 15, 2023 · zha-device-handlers #2433

Changes proposed for ZHA

  • pull request A proposed change to add support for a Tuya wall thermostat. This would allow the thermostat to work with ZHA once merged. since January 11, 2026 · zha-device-handlers #4644

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: _TZE200_2ekuz3dz / TS0601

2 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top