Back to all devices

Tuya TS110E_2gang_2 in Home Assistant

Wall switches · Zigbee · 2 channel dimmer

Zigbee2MQTT Quirk proposed, not merged yet 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: TS110E_2gang_2
Device type: Wall switches
Radio: Zigbee
Power: Mains powered
Reports itself as: _TZ3210_pagajpog, _TZ3210_4ubylghk, _TZ3210_vfwhhldz, _TZ3210_3mpwqzuu, _TZ3210_mt5xjoy6
Also sold as: Nedis ZBWD20RD
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The TS110E switch cannot change its physical switch type (Toggle/Momentary) in ZHA, restricting customization options. since January 3, 2026 · zha-device-handlers #4618
support requested The Tuya 2-gang dimmer (TS110e) is not supported in ZHA, so Home Assistant cannot adjust its brightness. Adding support would allow users to control the dimmer through Home Assistant. since October 5, 2025 · zha-device-handlers #4366

Changes proposed for ZHA

pull request A pull request proposes adding support for the Tuya TS110E 2 gang dimmer, which would allow Home Assistant to adjust its brightness settings. since June 9, 2026 · zha-device-handlers #5077

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #5077 · by @WBNet-Wout · June 9, 2026
Signature: _TZ3210_pagajpog / TS110E

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

SONOFF ZBMINIR2 Wall switches · Zigbee · Zigbee smart switch Zigbee2MQTT ZHA quirk 3 open reports Review · from 17.03 €
Aqara SSM-U01 Wall switches · Zigbee · Single switch module T1 (with neutral) Zigbee2MQTT ZHA quirk 1 open report Review
AduroSmart 81849 Wall switches · Zigbee · ERIA Built-in Dimmer Zigbee2MQTT Review
BTicino 3584C Wall switches · Zigbee · Connected lighting micromodule Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.