Back to all devices

Tuya TS0601_soil_3 in Home Assistant

Climate sensors · Zigbee · Soil sensor

Zigbee2MQTT Quirk included in ZHA 6 open reports

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
Tuya
Model
TS0601_soil_3
Device type
Climate sensors
Radio
Zigbee
Power
Battery
Reports itself as
_TZE284_aao3yzhs, _TZE284_nhgdf6qr, _TZE2841000000_nhgdf6qr, _TZE284_ap9owrsa, _TZE284_33bwcga2, _TZE284_wckqztdq, _TZE284_3urschql, _TZE284_tgrzpqf4, _TZE2841000000_tgrzpqf4
Also sold as
GIEX GX04, GIEX GX06
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

  • open A Tuya soil sensor incorrectly reports its battery size as AA instead of AAA, which could affect battery monitoring accuracy. since August 11, 2026 · zha-device-handlers #5240
  • open An issue reports a TypeError when using the Tuya TS0601 sensor with specific Home Assistant versions. Fixing this would prevent crashes and ensure the sensor works reliably. since August 6, 2026 · zha-device-handlers #5232
  • open A Tuya battery device shows incorrect battery percentage updates. Fixing this would ensure the battery status is reported accurately in Home Assistant. since June 28, 2026 · zha-device-handlers #5126
  • open A soil sensor from Tuya shows 0% battery in ZHA, even though it has power. Fixing this would allow Home Assistant to display the correct battery level for the sensor. since November 25, 2025 · zha-device-handlers #4519
  • open An issue highlights that two out of three Tuya TS0601 soil sensors incorrectly show 0% battery, likely due to a quirk code bug. since August 24, 2025 · zha-device-handlers #4288

Requests for ZHA support

  • support requested The Tuya soil sensor _TZE2841000000_tgrzpqf4 (SGS01Z variant) is not supported, so Home Assistant cannot read soil moisture data. Adding support would enable this functionality. since July 6, 2026 · zha-device-handlers #5150

Changes proposed for ZHA

  • pull request A pull request suggests changing how Tuya v2 quirks attribute their defining module as the source, which may improve debugging or future updates. since October 29, 2026 · zha-device-handlers #5607
  • pull request Giex GX04 soil sensor shows incorrect battery size; the fix would display the correct battery level. since October 29, 2026 · zha-device-handlers #5605
  • pull request A Tuya soil sensor is not yet supported in ZHA. The proposed change would enable Home Assistant to read soil data from this device. since May 31, 2026 · zha-device-handlers #5048
  • pull request A soil sensor from Tuya is not supported in ZHA, making it impossible to read soil data. The proposed change would add support to allow Home Assistant to use the sensor's measurements. since May 15, 2026 · zha-device-handlers #5004

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Temperature report interval Humidity report interval Display unit Temperature alarm Alarm temperature max Alarm temperature min Temperature sensitivity Humidity alarm Alarm humidity max Alarm humidity min +9

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: _TZE284_aao3yzhs / TS0601

128 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top