Back to all devices

Tuya TS0601_cover_6 in Home Assistant

Covers & blinds · Zigbee · Cover motor

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: TS0601_cover_6
Device type: Covers & blinds
Radio: Zigbee
Power: Battery
Reports itself as: _TZE200_cpbo62rn, _TZE200_libht6ua, _TZE284_libht6ua
Also sold as: Tuya LY-108
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested A TS0601 cover motor is not supported. Adding support would enable ZHA to control the motor for cover operations. since May 10, 2025 · zha-device-handlers #4059

Changes proposed for ZHA

pull request A Tuya blind motor is not supported in ZHA, preventing control of blinds. The proposed change would add support to allow Home Assistant to operate the motor. since May 13, 2026 · zha-device-handlers #4999

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Motor direction Set upper limit Set lower limit Delete upper limit Delete lower limit Delete all limits Motor fault Start calibration Stop calibration

Source: zha-device-handlers · pull request #4999 · by @mwelchuk · May 13, 2026 · 2 approvals
Signature: _TZE200_libht6ua / TS0601

3 more quirks for this device

Quirk proposed, not merged yet _TZE200_cpbo62rn / TS0601 zha-device-handlers · pull request #4943 · by @delneet · April 23, 2026
Quirk proposed, not merged yet _TZE200_libht6ua / TS0601 zha-device-handlers · pull request #4943 · by @delneet · April 23, 2026
Quirk proposed, not merged yet _TZE284_libht6ua / TS0601 zha-device-handlers · pull request #4943 · by @delneet · April 23, 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Moes MS-108ZR Covers & blinds · Zigbee · Zigbee + RF curtain switch module Zigbee2MQTT 2 open reports Review
NodOn SIN-4-RS-20 Covers & blinds · Zigbee · Roller shutter relay switch Zigbee2MQTT ZHA quirk 1 open report Review
Legrand 067776 Covers & blinds · Zigbee · Netatmo wired shutter switch Zigbee2MQTT Review
LoraTap SC500ZB Covers & blinds · Zigbee · Smart curtain/shutter switch Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.