Back to all devices

Tuya TS011F_plug_2 in Home Assistant

Smart plugs · Zigbee · Smart plug (without power monitoring)

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

We have a detailed page on this device with compatibility ratings and prices. Details and compatibility

Brand: Tuya
Model: TS011F_plug_2
Device type: Smart plugs
Radio: Zigbee
Reports itself as: _TZ3000_hyfvrar3, _TZ3000_v1pdxuqq, _TZ3000_8a833yls, _TZ3000_bfn1w0mm, _TZ3000_nzkqcvvs, _TZ3000_rtcrrvia, _TZ3000_ysiog9xi, _TZ3000_o1jzcxou, _TZ3210_nhqka112, _TZ3000_uyrhiafs
Also sold as: BSEED _TZ3000_o1jzcxou, BSEED S-PC86ZEUSK1B
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since December 30, 2025 · zha-device-handlers #4611

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since September 6, 2026 · zha-device-handlers #5301

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #5301 · by @kaibae19 · September 6, 2026
Signature: _TZ3000_ysiog9xi / TS0001

1 more quirk for this device

Quirk proposed, not merged yet _TZ3000_o1jzcxou / TS011F zha-device-handlers · pull request #5188 · by @kugaevsky · July 21, 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →