Back to all devices

Tuya TS0052_2 in Home Assistant

Wall switches · Zigbee · Zigbee dimmer module 2 channel

Zigbee2MQTT Quirk proposed, not merged yet 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: TS0052_2
Device type: Wall switches
Radio: Zigbee
Power: Mains powered
Reports itself as: _TZ3000_zjtxnoft, _TZ3000_kvwrdf47, _TZ3000_sfibawtr
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested A device with identifier 0052 is not recognized by ZHA, preventing it from being used. Support would enable its integration with Home Assistant. since November 28, 2025 · zha-device-handlers #4533
support requested A 1-gang dimmer with model TS0052 is not supported in ZHA, so it cannot control lights. Adding support would allow it to function properly. since November 28, 2025 · zha-device-handlers #4532

Changes proposed for ZHA

pull request A Tuya switch would get support for different switch types in ZHA, allowing it to function correctly instead of being limited. since August 12, 2026 · zha-device-handlers #5244

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Switch type

Source: zha-device-handlers · pull request #5244 · by @raserdk · August 12, 2026
Signature: _TZ3000_zjtxnoft / TS0052

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

SONOFF ZBMINIR2 Wall switches · Zigbee · Zigbee smart switch Zigbee2MQTT ZHA quirk 3 open reports Review · from 17.03 €
Aqara SSM-U01 Wall switches · Zigbee · Single switch module T1 (with neutral) Zigbee2MQTT ZHA quirk 1 open report Review
AduroSmart 81849 Wall switches · Zigbee · ERIA Built-in Dimmer Zigbee2MQTT Review
BTicino 3584C Wall switches · Zigbee · Connected lighting micromodule Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.