Back to all devices

Tuya SPM02 in Home Assistant

Energy · Zigbee · Smart energy monitor for 3P+N system

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: SPM02
Device type: Energy
Radio: Zigbee
Power: Mains powered
Reports itself as: _TZE204_ves1ycwx, _TZE284_ves1ycwx, _TZE200_ves1ycwx
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested A request for support for a Tuya 3-phase energy meter that is not accurately reporting power usage. Proper integration would allow monitoring of electricity consumption for three-phase systems. since November 17, 2023 · zha-device-handlers #2757

Changes proposed for ZHA

pull request Adds support for the Zemismart SDM01 3-phase energy meter, allowing Home Assistant to read electricity usage data from this device. since October 22, 2026 · zha-device-handlers #5515
pull request A pull request proposes adding support for Zemismart energy meters (SPM01/SPM02) to ZHA. This would allow accurate tracking of electricity consumption for these devices. since September 22, 2023 · zha-device-handlers #2603

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #2603 · by @agocsdaniel · September 22, 2023 · 16 approvals
Signature: _TZE204_ves1ycwx / TS0601

1 more quirk for this device

Quirk proposed, not merged yet _TZE200_ves1ycwx / TS0601 zha-device-handlers · pull request #2603 · by @agocsdaniel · September 22, 2023 · 16 approvals

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Legrand 412015 Energy · Zigbee · DIN power consumption module Zigbee2MQTT Review
Develco EMIZB-132 Energy · Zigbee · Wattle AMS HAN power-meter sensor Zigbee2MQTT ZHA quirk 1 open report Review
BTicino F20T60A Energy · Zigbee · DIN power consumption module Zigbee2MQTT Review
Datek HSE2905E Energy · Zigbee · Datek Eva AMS HAN power-meter sensor Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.